At the moment, we have decided to temporary close for new orders. We have decided to do this, until we have our new Web shop up and running, so we can go 100% live with Kazi Networks, in the mean time your welcome to sent us en email if your interested and we will get back to you as soon as we are ready to open for orders again.
We Apologize for the Inconvenience.
Best Regards Kazi Networks Team
web02-prod.kazi.dk has been update!
Those of you that are located at (vhcs01.kazi.dk / web02-prod.kazi.dk) might have experienced some downtime on different services like; Mail, FTP and DB. These short downtimes were caused due to some critical software updates, which was necessary for the security of the server.
These updates were applied to avoid black-hats that might have wanted to use exploits to compromise the server.
Everything is again running stable, same as a bit faster than before - If you experience some issues, feel free to write us at support [ a ] kazi-networks.com !
Have a nice weekend.
________________________ Written by: gbj Friday 11 July 2008 - 21:12:28
Setup Guide for Mumble.
1# First of all you need to get Mumble from here.
2# After you have installed and started Mumble, you will be asked if this is your first time and if you would like to go through the Audio Wizard to configure your Sound card, which you press YES to.
3# Then you choose Next to begin it, at the Device Selection you have to choose your input and output devices. Input usally being your Microphone and output is your speakers or what you might have to choose there.
4# Next you will hear some Tones, where you also have the option to turn up and down for the ms, untill you dont hear any jitter in the sound. just like the text says.
5# Next it will be your Microphone you have to adjust.
6# Next you will also be setting the Microphone / Voice Activity Detection, again just do as it asks you to.
7# And we are Done =) , Choose or create the server you want to join and speak all you want.
________________________ Written by: mdn Sunday 06 July 2008 - 19:22:05
The servers have been moved!
After we moved the servers one of them did not come up as expected - Shell01 are suffering from some issues due to a faulty kernel upgrade which caused the server to loose all PCI drivers. We are working on a solution for this, and hopefully we will have that by tonight. Questions can be directed to support [ a ] kazi-networks.com or in our IRC channel #K-N at QuakeNet and OgameNet.
The overall downtime of the remaining servers was calculated to around 15 minutes.
________________________ Written by: gbj Friday 20 June 2008 - 14:24:26
Backbone upgraded
We have just installed a new Backbone switch; this makes us capable of handling 48 Gbps Non-Blocking internally. The downtime was calculated to 2-5 seconds so most of you haven’t noticed the fallout.
________________________ Written by: gbj Sunday 04 May 2008 - 23:51:09
New IP range
We have gotten a whole new IP range, which means we are going to move all pages during the evening and night today.
The CS servers have also been changed, though we are going to wait with the BNC part until we have talked with QuakeNet. Though we have already gotten a new Ident from OnlinegamesNet also known as OgameNet, we still have to wait for QuakeNet.org.
We will inform you when this happens.
________________________ Written by: gbj Tuesday 19 February 2008 - 19:33:41
